ENIT

Joël ALEXIS

PROFESSEUR DES UNIVERSITES

ServiceEQUIPE IMF, DIRECTION DE LA FORMATION ET DE LA VIE ETUDIANTE
Téléphone0562442723

Publications

1. This is an institutional or departmental repository. 2. OATAO (Open Archive Toulouse Archive Ouverte) holds all types of materials. 3. Papers may include: (a) unpublished pre-prints (not peer-reviewed) (b) final peer-reviewed drafts (post-prints) (c) published versions 4. Principal Languages: English; French

Mechanical adhesion of SIO2 thin film on a polymeric substrate under compressive stress

Ho, Caroline and Dehoux, Anita and Lacroix, Loïc and Alexis, Joël and Dalverny, Olivier and Châtel, Sébastien and Faure, Bruce. Mechanical adhesion of SIO2 thin film on a polymeric substrate under compressive stress. (2016) In: XXXI International Conference on Surface Modification Technologies (SMT31), 5 July 2016 - 7 July 2016 (Mons, Belgium).

Voir la publication en ligne.

Multiaxial fatigue analysis of a high performance Nickel-based superalloy

Selva, Pierre and Lorrain, Bernard and Alexis, Joël and Seror, Alexandre and Longuet, Arnaud and Mary, Clément and Denard, Fabrice. Multiaxial fatigue analysis of a high performance Nickel-based superalloy. (2015) International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (4). 544-549.

Voir la publication en ligne.

Experimental SAC305 shear stress-strain hysteresis loop construction using Hall's one-dimensional model based on strain gages measurements

Libot, Jean-Baptiste and Alexis, Joël and Dalverny, Olivier and Arnaud, Lionel and Milesi, Philippe and Dulondel, Frédéric. Experimental SAC305 shear stress-strain hysteresis loop construction using Hall's one-dimensional model based on strain gages measurements. (2019) Journal of Electronic Packaging, 141 (2). 021002-1-021002-15. ISSN 1043-7398

Voir la publication en ligne.

Thermo-mechanical behavior of power electronic packaging assemblies: From characterization to predictive simulation of lifetimes

Dalverny, Olivier and Alexis, Joël. Thermo-mechanical behavior of power electronic packaging assemblies: From characterization to predictive simulation of lifetimes. (2018) In: 7th International Conference on Structural Analysis of Advanced Materials, ICSAAM 2017, 19 September 2017 - 22 September 2017 (Bucharest, Romania).

Voir la publication en ligne.

Experimental strain energy density dissipated in SAC305 solder joints during different thermal cycling conditions using strain gages measurements

Libot, Jean-Baptiste and Dulondel, Frédéric and Milesi, Philippe and Alexis, Joël and Arnaud, Lionel and Dalverny, Olivier. Experimental strain energy density dissipated in SAC305 solder joints during different thermal cycling conditions using strain gages measurements. (2018) In: IEEE 68th Electronic Components and Technology Conference, 29 May 2018 - 1 June 2018 (San Diego, United States).

Voir la publication en ligne.

Mechanical adhesion of SiO2 thin films onto polymeric substrates

Ho, Caroline and Alexis, Joël and Dalverny, Olivier and Balcaen, Yannick and Dehoux, Anita and Châtel, Sébastien and Faure, Bruce. Mechanical adhesion of SiO2 thin films onto polymeric substrates. (2018) Surface Engineering. 536-541. ISSN 0267-0844

Voir la publication en ligne.

Microstructural evolutions of Sn-3.0Ag-0.5Cu solder joints during thermal cycling

Libot, Jean-Baptiste and Alexis, Joël and Dalverny, Olivier and Arnaud, Lionel and Milesi, Philippe and Dulondel, Frédéric. Microstructural evolutions of Sn-3.0Ag-0.5Cu solder joints during thermal cycling. (2018) Microelectronics Reliability, 83. 64-76. ISSN 0026-2714

Voir la publication en ligne.

Laser welding of titanium alloys with an Yb: YAG sisk source

Béguin, Jean-Denis and Gazagne, Valentin and Balcaen, Yannick and Alexis, Joël and Andrieu, Eric. Laser welding of titanium alloys with an Yb: YAG sisk source. (2018) Materials Science Forum, 941. 845-850. ISSN 1662-9752

Voir la publication en ligne.

Study of the Oxidation Assisted Intergranular Cracking Mechanism on a Ni-Base Superalloy

Milanese, julien and Andrieu, Eric and Osio, Jean-Baptiste and Alexis, Joël and Bardel, Didier. Study of the Oxidation Assisted Intergranular Cracking Mechanism on a Ni-Base Superalloy. (2018) In: Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications. (The Minerals, Metals & Materials Series book series (MMMS)). Springer, 805-815. ISBN 978-3-319-89480-5 (online)

Voir la publication en ligne.

Corrosion behaviour of AA 1370 strands for wires: Identification of the critical metallurgical parameters

Gravina, Rosanne and Josse, Claudie and Viguier, Bernard and Laurino, Adrien and Alexis, Joël and Hughes, Anthony E. and Blanc, Christine. Corrosion behaviour of AA 1370 strands for wires: Identification of the critical metallurgical parameters. (2018) Corrosion Science, 134. 112-121. ISSN 0010-938X

Voir la publication en ligne.

Adhesion characterization of SiO2 thin films evaporated onto a polymeric substrate

Ho, Caroline and Dehoux, Anita and Lacroix, Loïc and Alexis, Joël and Dalverny, Olivier and Châtel, Sébastien and Faure, Bruce. Adhesion characterization of SiO2 thin films evaporated onto a polymeric substrate. (2018) International Journal of Engineering Research & Science (IJOER), 4 (2). 38-46. ISSN 2395-6992

Voir la publication en ligne.

Automation of a creep-testing machine for research activities

Trajin, Baptiste and Balcaen, Yannick and Alexis, Joël. Automation of a creep-testing machine for research activities. (2018) In: International Conference on Research and Education in Mechatronics (REM), 7 June 2018 - 8 June 2018 (Delft, Netherlands).

Voir la publication en ligne.

On the role of hydrogen during the corrosion processes affecting the 2024 aluminum alloy

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Odemer, Grégory and Blanc, Christine. On the role of hydrogen during the corrosion processes affecting the 2024 aluminum alloy. (2014) In: International Hydrogen Conference (IHC 2012). ASME Press.

Voir la publication en ligne.

Effect of actual and accelerated ageing on microstructure evolution and mechanical properties of a 2024-T351 aluminium alloy

Prudhomme, Manida and Billy, François and Alexis, Joël and Benoit, Guillaume and Hamon, Florence and Larignon, Céline and Odemer, Grégory and Blanc, Christine and Hénaff, Gilbert. Effect of actual and accelerated ageing on microstructure evolution and mechanical properties of a 2024-T351 aluminium alloy. (2018) International Journal of Fatigue, 107. 60-71. ISSN 0142-1123

Voir la publication en ligne.

Application of Kelvin force microscopy measurements and secondary ion mass spectroscopy to evidence hydrogen embrittlement for the 2024 aluminum alloy

Larignon, Céline and Andrieu, Eric and Alexis, Joël and Lacroix, Loïc and Odemer, Grégory and Blanc, Christine. Application of Kelvin force microscopy measurements and secondary ion mass spectroscopy to evidence hydrogen embrittlement for the 2024 aluminum alloy. (2014) In: International Hydrogen Conference (IHC 2012). ASME Press.

Voir la publication en ligne.

Identification of damage and fracture modes in power electronic packaging from experimental micro-shear tests and finite element modeling

Msolli, Sabeur and Baazaoui, Ahlem and Alexis, Joël and Kim, Heung Soo. Identification of damage and fracture modes in power electronic packaging from experimental micro-shear tests and finite element modeling. (2018) Engineering Fracture Mechanics, 188. 470-492. ISSN 0013-7944

Voir la publication en ligne.

Mechanical behavior and adhesion of the Ti/Cr/Au metallization scheme on diamond substrate

Msolli, Sabeur and Alexis, Joël and Kim, Heung Soo. Mechanical behavior and adhesion of the Ti/Cr/Au metallization scheme on diamond substrate. (2017) Advanced Engineering Materials, 19 (8). ISSN 1438-1656

Voir la publication en ligne.

Influence of Yb:YAG laser beam parameters on Haynes 188 weld fusion zone microstructure and mechanical properties

Graneix, Jérémie and Béguin, Jean-Denis and Alexis, Joël and Masri, Talal. Influence of Yb:YAG laser beam parameters on Haynes 188 weld fusion zone microstructure and mechanical properties. (2017) Metallurgical and Materials Transactions B, 48 (4). 2007-2016. ISSN 1073-5615

Voir la publication en ligne.

Mechanical fatigue assessment of SAC305 solder joints under harmonic and random vibrations

Libot, Jean-Baptiste and Arnaud, Lionel and Dalverny, Olivier and Alexis, Joël and Milesi, Philippe and Dulondel, Frédéric. Mechanical fatigue assessment of SAC305 solder joints under harmonic and random vibrations. (2016) In: 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2016), 18 April 2016 - 20 April 2016 (Dresden, Germany).

Voir la publication en ligne.

Mechanical fatigue assessment of SAC305 solder joints under harmonic vibrations

Libot, Jean-Baptiste and Arnaud, Lionel and Dalverny, Olivier and Alexis, Joël and Milesi, Philippe and Dulondel, Frédéric. Mechanical fatigue assessment of SAC305 solder joints under harmonic vibrations. (2016) In: 2016 International Conference on Electronics Packaging (ICEP 2016), 20 April 2016 - 22 April 2016 (Sapporo, Japan).

Voir la publication en ligne.

A Comparison between an Advanced High-Strength Steel and a High-Strength Steel Due to the Spring back Effect

Silva, Erika Aparecida da and Fernandes, Luiz Fernando Vargas Malerba and Jesus Silva, José Wilson de and Ribeiro, Rosinei Batista and Santos Pereira, Marcelo dos and Alexis, Joël. A Comparison between an Advanced High-Strength Steel and a High-Strength Steel Due to the Spring back Effect. (2016) IOSR Journal of Mechanical and Civil Engineering, 13 (05). 21-27. ISSN 2320-334X

Voir la publication en ligne.

Low cycle biaxial fatigue behavior of direct aged Nickel-based 718 superalloy

Selva, Pierre and Lorrain, Bernard and Alexis, Joël and Seror, Alexandre and Longuet, Arnaud and Mary, Caroline and Denard, Fabrice. Low cycle biaxial fatigue behavior of direct aged Nickel-based 718 superalloy. (2016) International Journal of Engineering Research and Applications, 6 (3). 1-8. ISSN 2248-9622

Voir la publication en ligne.

Assessment of candidate metallization systems deposited on diamond using nano-indentation and nano-scratching tests

Msolli, Sabeur and Alexis, Joël and Kim, Heung Soo and Dalverny, Olivier and Karama, Moussa. Assessment of candidate metallization systems deposited on diamond using nano-indentation and nano-scratching tests. (2016) Thin Solid Films, 619. 53-60. ISSN 0040-6090

Voir la publication en ligne.

Quantification of the pile-up effect for improving inverse mechanical analysis by means of nanoindentation

Petre-Bordenave, Romain and Thebault, Lucie and Desmarres, Jean-Michel and Alexis, Joël. Quantification of the pile-up effect for improving inverse mechanical analysis by means of nanoindentation. (2014) In: Symposium 2014 on Design, Test, Integration & Packaging of MEMS/MOEMS, 1 April 2014 - 4 April 2014 (Cannes, France).

Voir la publication en ligne.

Experimental Study on the Mechanical Effects of the Vibration-Assisted Ball-Burnishing Process

Travieso-Rodríguez, Jose Antonio and Gomez-gras, Giovanni and Jorba-Peiro, Jordi and Carrillo, Francisco Javier and Dessein, Gilles and Alexis, Joël and González-Rojas, Hernan Alberto. Experimental Study on the Mechanical Effects of the Vibration-Assisted Ball-Burnishing Process. (2015) Materials and Manufacturing Processes, 30 (12). 1490-1497. ISSN 1042-6914

Voir la publication en ligne.

Effects of a ball-burnishing process assisted by vibrations in G10380 steel specimens

Travieso-Rodríguez, Jose Antonio and Gomez-gras, Giovanni and Dessein, Gilles and Carrillo, Francisco Javier and Alexis, Joël and Jorba-Peiro, Jordi and Aubazac, Nathalie. Effects of a ball-burnishing process assisted by vibrations in G10380 steel specimens. (2015) International Journal of Advanced Manufacturing Technology, 81 (9). 1757-1765. ISSN 0268-3768

Voir la publication en ligne.

Corrosion-fatigue lifetime of Aluminium–Copper–Lithium alloy 2050 in chloride solution

Guérin, Mathilde and Alexis, Joël and Andrieu, Eric and Blanc, Christine and Odemer, Grégory. Corrosion-fatigue lifetime of Aluminium–Copper–Lithium alloy 2050 in chloride solution. (2015) Materials and Design, 87. 681-692. ISSN 0261-3069

Voir la publication en ligne.

Identification of the metallurgical parameters explaining the corrosion susceptibility in a 2050 aluminium alloy

Guérin, Mathilde and Alexis, Joël and Andrieu, Eric and Laffont-Dantras, Lydia and Lefebvre, Williams and Odemer, Grégory and Blanc, Christine. Identification of the metallurgical parameters explaining the corrosion susceptibility in a 2050 aluminium alloy. (2016) Corrosion Science, 102. 291-300. ISSN 0010-938X

Voir la publication en ligne.

Experimental characterization of the mechanical behavior of two solder alloys for high temperature power electronics applications

Msolli, Sabeur and Alexis, Joël and Dalverny, Olivier and Karama, Moussa. Experimental characterization of the mechanical behavior of two solder alloys for high temperature power electronics applications. (2015) Microelectronics Reliability (55). 164-171. ISSN 0026-2714

Voir la publication en ligne.

Propagation of Intergranular Corrosion Defects in AA 2024-T351 Evaluated by a Decrease in Mechanical Resistance

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Odemer, Grégory and Blanc, Christine. Propagation of Intergranular Corrosion Defects in AA 2024-T351 Evaluated by a Decrease in Mechanical Resistance. (2014) Journal of The Electrochemical Society, 161 (6). C339-C348. ISSN 0013-4651

Voir la publication en ligne.

A comparative study of microscratch and microtensile adhesion tests for nickel coatings on various substrates

Nguyen, Patrick and Seguineau, Cédric and Desmarres, Jean-Michel and Masri, Talal and Alexis, Joël. A comparative study of microscratch and microtensile adhesion tests for nickel coatings on various substrates. (2014) In: DTIP 2-4 April 2014,, 2 April 2014 - 4 April 2014 (Cannes Côte d’Azur, France, France).

Voir la publication en ligne.

Comparison of Physical-chemical and Mechanical Properties of Chlorapatite and Hydroxyapatite Plasma Sprayed Coatings

Demnati, Imane and Grossin, David and Marsan, Olivier and Bertrand, Ghislaine and Collonges, Gérard and Combes, Christèle and Parco, Maria and Braceras, Inigo and Alexis, Joël and Balcaen, Yannick and Rey, Christian. Comparison of Physical-chemical and Mechanical Properties of Chlorapatite and Hydroxyapatite Plasma Sprayed Coatings. (2014) The open biomedical engineering journal, 9 (suppl.1-M3). 26-39. ISSN 1874-1207

Voir la publication en ligne.

Weldability of superalloys Hastelloy X by Yb : YAG laser

Graneix, Jérémie and Béguin, Jean-Denis and Alexis, Joël and Masri, Talal. Weldability of superalloys Hastelloy X by Yb : YAG laser. (2015) In: International Symposium on Aircraft Materials ACMA 2014, 23 April 2014 - 26 April 2014 (Marrakech, Morocco).

Voir la publication en ligne.

Experimental and Numerical Study of Interfacial Fracture Parameters of a Brazed Joints

Baazaoui, Ahlem and Fourcade, Thibaut and Dalverny, Olivier and Alexis, Joël and Karama, Moussa. Experimental and Numerical Study of Interfacial Fracture Parameters of a Brazed Joints. (2015) Advanced Materials Research, 1099. 9-16. ISSN 1022-6680

Voir la publication en ligne.

Effect of the microstructure and environmental exposure conditions on the corrosion behaviour of the 2050 alloy

Guérin, Mathilde and Andrieu, Eric and Odemer, Grégory and Alexis, Joël and Blanc, Christine. Effect of the microstructure and environmental exposure conditions on the corrosion behaviour of the 2050 alloy. (2014) Materials Science Forum, 794-796. 205-210. ISSN 0255-5476

Voir la publication en ligne.

Parametric identification of elastic-plastic constitutive laws using spherical indentation

Fourcade, Thibaut and Dalverny, Olivier and Alexis, Joël and Seguineau, Cédric and Desmarres, Jean-Michel. Parametric identification of elastic-plastic constitutive laws using spherical indentation. (2014) In: 5th International Symposium on Aircraft Materials - ACMA 2014, 23 April 2014 - 26 April 2014 (Marrakech, Morocco).

Voir la publication en ligne.

Effect of varying conditions of exposure to an aggressive medium on the corrosion behavior of the 2050 Al--Cu--Li alloy

Guérin, Mathilde and Andrieu, Eric and Odemer, Grégory and Alexis, Joël and Blanc, Christine. Effect of varying conditions of exposure to an aggressive medium on the corrosion behavior of the 2050 Al--Cu--Li alloy. (2014) Corrosion Science, 85. 455-470. ISSN 0010-938X

Voir la publication en ligne.

The influence of artificial ageing on the corrosion behaviour of a 2050 aluminium--copper--lithium alloy

Proton, Vincent and Alexis, Joël and Andrieu, Eric and Delfosse, Jérôme and Deschamps, Alexis and De Geuser, Frédéric and Lafont, Marie-Christine and Blanc, Christine. The influence of artificial ageing on the corrosion behaviour of a 2050 aluminium--copper--lithium alloy. (2014) Corrosion Science, 80. 494-502. ISSN 0010-938X

Voir la publication en ligne.

Recherches concernant le comportement des aciers revêtus au frottement sec et à haute température

Popescu, Téodor and Alexis, Joël. Recherches concernant le comportement des aciers revêtus au frottement sec et à haute température. (2010) Traitements & Matériaux (404-405). 33-36.

Voir la publication en ligne.

Micro-scale modeling of carbon-fiber reinforced thermoplastic materials

Gherissi, Abderraouf and Abbassi, Fethi and Zghal, Ali and Mistou, Sébastien and Alexis, Joël. Micro-scale modeling of carbon-fiber reinforced thermoplastic materials. (2010) In: 5th International Conference on Advances in Mechanical Engineering and Mechanics, 18 December 2010 - 20 December 2010 (Hammamet, Tunisia).

Voir la publication en ligne.

Numerical modeling and prediction of thermomechanical degradation of power electronic packaging

Baazaoui, Ahlem and Dalverny, Olivier and Alexis, Joël and Karama, Moussa. Numerical modeling and prediction of thermomechanical degradation of power electronic packaging. (2013) In: ICSAAM 2013, The 5th International Conference on Structural Analysis of Advanced Materials, 23 September 2013 - 26 September 2013 (Island of Kos, Greece).

Voir la publication en ligne.

Etude du comportement mécanique des joints de brasure Au-Ge pour le report des composants SiC pour l’électronique de puissance haute température

Cissé, Alioune and Massiot, Gregor and Munier, Catherine and Vidal, Paul-Etienne and Carrillo, Francisco Javier and Alexis, Joël. Etude du comportement mécanique des joints de brasure Au-Ge pour le report des composants SiC pour l’électronique de puissance haute température. (2012) In: 14ème édition de la Conférence Electronique de Puissance du Futur, 5 July 2012 - 7 July 2012 (Bordeaux, France).

Voir la publication en ligne.

Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy

Dutilh, Vincent and Popa, Andreï and Dessein, Gilles and Alexis, Joël and Perrin, Géraldine. Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy. (2010) In: CIRP ICME ’10 - 7th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING, 23 June 2010 - 25 June 2010 (Capri, Italy). (Unpublished)

Voir la publication en ligne.

Characterization of refractory titanium alloys welded by TIG and laser processes

Ferdinand, Cyrille and Alexis, Joël and Masri, Talal and Petit, Jacques-Alain and Ganza, Jean-Christophe. Characterization of refractory titanium alloys welded by TIG and laser processes. (2007) In: 11th World Conference on Titanium, 3 June 2007 - 7 June 2007 (Kyoto, Japan).

Voir la publication en ligne.

Mechanical characterization of an Au-Ge solder alloy for high temperature electronic devices

Msolli, Sabeur and Dalverny, Olivier and Alexis, Joël and Karama, Moussa. Mechanical characterization of an Au-Ge solder alloy for high temperature electronic devices. (2010) In: 6th International Conference on Integrated Power Electronics Systems (CIPS), 16 March 2010 - 18 March 2010 (Nuremberg, Germany).

Voir la publication en ligne.

Focus on the interactions between artificial microstructural ageing and susceptibility to localized corrosion under cyclic corrosion tests of an aeronautic 2024-T351 aluminium alloy

Larignon, Céline and Andrieu, Eric and Alexis, Joël and Odemer, Grégory and Blanc, Christine. Focus on the interactions between artificial microstructural ageing and susceptibility to localized corrosion under cyclic corrosion tests of an aeronautic 2024-T351 aluminium alloy. (2012) In: EUROCORR 2012, 9 September 2012 - 13 September 2012 (Istanbul, Turkey).

Voir la publication en ligne.

Adherence of coatings: determination - problems - examples

Alexis, Joël and Etcheverry, Bernard. Adherence of coatings: determination - problems - examples. (2007) In: 21st international conference on surface modification technologies, 24 September 2007 - 26 September 2007 (Paris, France).

Voir la publication en ligne.

Corrosion and stress corrosion cracking behaviour of 2050 aluminium-lithium alloy joined by friction stir welding (FSW)

Proton, Vincent and Alexis, Joël and Andrieu, Eric and Odemer, Grégory and Blanc, Christine and Delfosse, Jérôme. Corrosion and stress corrosion cracking behaviour of 2050 aluminium-lithium alloy joined by friction stir welding (FSW). (2012) In: EUROCORR 2012, 9 September 2012 - 13 September 2012 (Istanbul, Turkey).

Voir la publication en ligne.

Study of the localized corrosion of over-aged aeronautical 2024 aluminum alloy. Kelvin probe Force Microscopy (KFM) application

Radutoiu, Nicoleta and Lacroix, Loïc and Alexis, Joël and Abrudeanu, Marioara and Petit, Jacques-Alain. Study of the localized corrosion of over-aged aeronautical 2024 aluminum alloy. Kelvin probe Force Microscopy (KFM) application. (2012) In: ACMA 2012, 9 May 2012 - 12 May 2012 (Fez, Morocco).

Voir la publication en ligne.

Ball-burnishing process influence on hardness ans residual stresses of aluminium A92017

Travieso-Rodríguez, Jose Antonio and González-Rojas, Hernan Alberto and Gomez-gras, Giovanni and Dessein, Gilles and Alexis, Joël. Ball-burnishing process influence on hardness ans residual stresses of aluminium A92017. (2013) In: 17th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology, 10 September 2013 - 11 September 2013 (Istanbul, Turkey).

Voir la publication en ligne.

Characterisation and understanding of the corrosion behaviour of the nugget in a 2050 aluminium alloy Friction Stir Welding joint

Proton, Vincent and Alexis, Joël and Andrieu, Eric and Delfosse, Jérôme and Lafont, Marie-Christine and Blanc, Christine. Characterisation and understanding of the corrosion behaviour of the nugget in a 2050 aluminium alloy Friction Stir Welding joint. (2013) Corrosion Science, 73. 130-142. ISSN 0010-938X

Voir la publication en ligne.

Etude expérimentale du soudage par laser YAG de l'alliage base nickel Hastelloy X

Graneix, Jérémie and Béguin, Jean-Denis and Pardeilhan, François and Masri, Talal and Alexis, Joël. Etude expérimentale du soudage par laser YAG de l'alliage base nickel Hastelloy X. (2013) In: Journées Annuelles de la SF2M, 29 October 2013 - 31 October 2013 (Villeneuve d'Ascq, France).

Voir la publication en ligne.

Adherence of electrodeposited Zn-Ni coatings on EN AW2024 T3 aluminium alloy

Alexis, Joël and Adrian, Denise and Masri, Talal and Petit, Jacques-Alain. Adherence of electrodeposited Zn-Ni coatings on EN AW2024 T3 aluminium alloy. (2004) Surface Engineering, 20 (2). 121-127. ISSN 0267-0844

Voir la publication en ligne.

Caractérisation expérimentale du comportement mécanique d’assemblage haute température pour l’électronique de puissance

Baazaoui, Ahlem and Alexis, Joël and Dalverny, Olivier and Karama, Moussa. Caractérisation expérimentale du comportement mécanique d’assemblage haute température pour l’électronique de puissance. (2013) In: Journées annuelles de la SF2M, 29 October 2013 - 31 October 2013 (Villeuve d'Ascq, France).

Voir la publication en ligne.

An assessment of contact metallization for high power and high temperature diamond Schottky devices

Koné, Sodjan and Schneider, Henri and Isoird, Karine and Thion, Fabien and Achard, Jocelyn and Issaoui, Riadh and Msolli, Sabeur and Alexis, Joël. An assessment of contact metallization for high power and high temperature diamond Schottky devices. (2012) Diamond and Related Materials, 27-28. 23-28. ISSN 0925-9635

Voir la publication en ligne.

Amorphous alumina oatings: processing, structure and remarkable barrier properties

Samélor, Diane and Lazar, Ana-Maria and Aufray, Maëlenn and Tendero, Claire and Lacroix, Loïc and Béguin, Jean-Denis and Caussat, Brigitte and Vergnes, Hugues and Alexis, Joël and Poquillon, Dominique and Pébère, Nadine and Gleizes, Alain and Vahlas, Constantin. Amorphous alumina oatings: processing, structure and remarkable barrier properties. (2011) Journal of Nanoscience and Nanotechnology (JNN), 11 (9). 8387-8391(5). ISSN 1533-4880

Voir la publication en ligne.

Effect of the over-ageing treatment on the mechanical properties of AA2024 aluminum alloy.

Radutoiu, Nicoleta and Alexis, Joël and Lacroix, Loïc and Petit, Jacques-Alain and Abrudeanu, Marioara and Rizea, Vasile and Vulpe, Sanda. Effect of the over-ageing treatment on the mechanical properties of AA2024 aluminum alloy. (2012) Revista de chimie (chemistry magazine), 63 (10). 1042-1045.

Voir la publication en ligne.

Application of Kelvin probe Force Microscopy (KFM) to evidence localized corrosion of over-aged aeronautical 2024 aluminum alloy

Radutoiu, Nicoleta and Alexis, Joël and Lacroix, Loïc and Abrudeanu, Marioara and Petit, Jacques-Alain. Application of Kelvin probe Force Microscopy (KFM) to evidence localized corrosion of over-aged aeronautical 2024 aluminum alloy. (2013) International Journal Key Engineering Materials , 550. 127-134. ISSN 1013-9826

Voir la publication en ligne.

Study of the influence of the artificial ageing temperature on the AA2024 alloy microstructure

Radutoiu, Nicoleta and Alexis, Joël and Lacroix, Loïc and Abrudeanu, Marioara and Petit, Jacques-Alain. Study of the influence of the artificial ageing temperature on the AA2024 alloy microstructure. (2013) Key Engineering Materials, 550. 115-125. ISSN 1013-9826

Voir la publication en ligne.

Combined Kelvin probe force microscopy and secondary ion mass spectrometry for hydrogen detection in corroded 2024 aluminium alloy

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Lacroix, Loïc and Odemer, Grégory and Blanc, Christine. Combined Kelvin probe force microscopy and secondary ion mass spectrometry for hydrogen detection in corroded 2024 aluminium alloy. (2013) Electrochimica Acta. ISSN 0013-4686

Voir la publication en ligne.

Validation of mechanical damage monitoring on aluminium freestanding thin films using electrical measurements

Fourcade, Thibaut and Broue, Adrien and Dehnnin, Jeremie and Desmarres, Jean-Michel and Seguineau, Cédric and Dalverny, Olivier and Alexis, Joël and Masri, Talal. Validation of mechanical damage monitoring on aluminium freestanding thin films using electrical measurements. (2013) Key Engineering Materials, 550. 157-164. ISSN 1013-9826

Voir la publication en ligne.

Viscoplastic behavior of diamond die attach subjected to high temperature conditions

Msolli, Sabeur and Baazaoui, Ahlem and Dalverny, Olivier and Alexis, Joël and Karama, Moussa. Viscoplastic behavior of diamond die attach subjected to high temperature conditions. (2012) In: 13th International conference on thermal, mechanical and multi-physics simulation and experiments in microelectronics and microsystems, EuroSimE 2012, 16 April 2012 - 18 April 2012 (Lisbon, Portugal).

Voir la publication en ligne.

Environmental protection of titanium alloys in centrifugal compressors at 500°C in saline atmosphere

Béguin, Jean-Denis and Faure, Pierre and Adrian, Denise and Alexis, Joël and Petit, Jacques-Alain and Belaygue, Philippe and Fournier, Dominique. Environmental protection of titanium alloys in centrifugal compressors at 500°C in saline atmosphere. (2004) Surface Engineering, 20 (2). 135-138. ISSN 0267-0844

Voir la publication en ligne.

Élaboration de céramiques sans ajouts de frittage par Spark Plasma Sintering pour application en électronique de puissance

Dagdag, Sélim and Alexis, Joël and Petit, Jacques-Alain and Ferrato, Marc and Galy, Jerome. Élaboration de céramiques sans ajouts de frittage par Spark Plasma Sintering pour application en électronique de puissance. (2007) Matériaux & Techniques, 95 (4-5). 297-306. ISSN 0032-6895

Voir la publication en ligne.

Electrical and mechanical characterisation of Si/Al ohmic contacts on diamond

Civrac de Fabian, Gabriel and Msolli, Sabeur and Alexis, Joël and Dalverny, Olivier and Schneider, Henri. Electrical and mechanical characterisation of Si/Al ohmic contacts on diamond. (2010) IEEE Electronics Letters , 46 (11). 791-793. ISSN 0013-5194

Voir la publication en ligne.

The contribution of hydrogen to the corrosion of 2024 aluminium alloy exposed to thermal and environmental cycling in chloride media

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Odemer, Grégory and Blanc, Christine. The contribution of hydrogen to the corrosion of 2024 aluminium alloy exposed to thermal and environmental cycling in chloride media. (2013) Corrosion Science, 69. 211-220. ISSN 0010-938X

Voir la publication en ligne.

Development of nickel phosphorus coatings containing micro particles of talc phyllosilicates

Alexis, Joël and Gaussens, Clélia and Etcheverry, Bernard and Bonino, Jean-Pierre. Development of nickel phosphorus coatings containing micro particles of talc phyllosilicates. (2013) Materials Chemistry and Physics (137 ). 723-733. ISSN 0254-0584

Voir la publication en ligne.

Modélisation des assemblages de ballons pressurisés stratosphériques

Selva, Pierre and Dalverny, Olivier and Mistou, Sébastien and Karama, Moussa and Alexis, Joël and Deramecourt, Arnaud. Modélisation des assemblages de ballons pressurisés stratosphériques. (2008) Mécanique & Industries, 9 (2). 159-165. ISSN 1296-2139

Voir la publication en ligne.

Links Between Machining Parameters and Surface Integrity in Drilling Ni-Superalloy

Dutilh, Vincent and Dessein, Gilles and Alexis, Joël and Perrin, Géraldine. Links Between Machining Parameters and Surface Integrity in Drilling Ni-Superalloy. (2010) Advanced Materials Research, 112. 171-178. ISSN 1662-8985

Voir la publication en ligne.

Micro-Scale Modeling of Carbon-Fiber Reinforced Thermoplastic Materials

Abbassi, Fethi and Gherissi, Abderraouf and Zghal, Ali and Mistou, Sébastien and Alexis, Joël. Micro-Scale Modeling of Carbon-Fiber Reinforced Thermoplastic Materials. (2012) Applied Mechanics and Materials, 146. 1-11. ISSN 1662-7482

Voir la publication en ligne.

Oxidation resistance of ODS alloy PM2000 from 880°C to 1400°C

Lours, Philippe and Alexis, Joël and Bernhart, Gérard. Oxidation resistance of ODS alloy PM2000 from 880°C to 1400°C. (1998) Journal of Materials Science Letters, 17 (13). 1089-1093. ISSN 0261-8028

Voir la publication en ligne.

Direct determination of trace elements in powdered samples by in-cell isotope dilution femtosecond laser ablation ICPMS

Fernandez Garcia, Beatriz and Claverie, Fanny and Pécheyran, Christophe and Alexis, Joël and Donard, Olivier F. X.. Direct determination of trace elements in powdered samples by in-cell isotope dilution femtosecond laser ablation ICPMS. (2008) Analytical Chemistry, 80 (18). 6981-6994. ISSN 0003-2700

Voir la publication en ligne.

Elemental fractionation effects in high repetition rate IR femtosecond laser ablation ICP-MS analysis of glasses

Claverie, Fanny and Fernandez Garcia, Beatriz and Pécheyran, Christophe and Alexis, Joël and Donard, Olivier F. X.. Elemental fractionation effects in high repetition rate IR femtosecond laser ablation ICP-MS analysis of glasses. (2009) Journal of Analytical Atomic Spectrometry, 24 (7). 891-902. ISSN 0267-9477

Voir la publication en ligne.

Investigation of Kelvin probe force microscopy efficiency for the detection of hydrogen ingress by cathodic charging in an aluminium alloy

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Lacroix, Loïc and Odemer, Grégory and Blanc, Christine. Investigation of Kelvin probe force microscopy efficiency for the detection of hydrogen ingress by cathodic charging in an aluminium alloy. (2013) Scripta Materialia, 68 (7). 479-482. ISSN 1359-6462

Voir la publication en ligne.

Characterization of the aerosol produced by infrared femtosecond laser ablation of polyacrylamide gels for the sensitive inductively coupled plasma mass spectrometry detection of selenoproteins

Claverie, Fanny and Pécheyran, Christophe and Mounicou, Sandra and Ballihaut, Guillaume and Fernandez Garcia, Beatriz and Alexis, Joël and Lobinski, Ryszard and Donard, Olivier F. X.. Characterization of the aerosol produced by infrared femtosecond laser ablation of polyacrylamide gels for the sensitive inductively coupled plasma mass spectrometry detection of selenoproteins. (2009) Spectrochimica Acta Part B: Atomic Spectroscopy, 64 (7). 649-658. ISSN 05848547

Voir la publication en ligne.

Structure, morphology and mechanical properties of electrodeposited composite coatings Ni–P/SiC

Alexis, Joël and Etcheverry, Bernard and Béguin, Jean-Denis and Bonino, Jean-Pierre. Structure, morphology and mechanical properties of electrodeposited composite coatings Ni–P/SiC. (2010) Materials Chemistry and Physics, 120 (2-3). 244-250. ISSN 0254-0584

Voir la publication en ligne.

Implicit integration scheme for porous viscoplastic potential-based constitutive equations

Msolli, Sabeur and Dalverny, Olivier and Alexis, Joël and Karama, Moussa. Implicit integration scheme for porous viscoplastic potential-based constitutive equations. (2011) Procedia Engineering, 10. 1544-1549. ISSN 1877-7058

Voir la publication en ligne.

Effects of the Unified Viscoplastic Formulation and Temperature Terms on the Thermomechanical Behavior of Soldering Materials

Msolli, Sabeur and Dalverny, Olivier and Alexis, Joël and Karama, Moussa. Effects of the Unified Viscoplastic Formulation and Temperature Terms on the Thermomechanical Behavior of Soldering Materials. (2012) Key Engineering Materials, 498. 219-226. ISSN 1662-9795

Voir la publication en ligne.

Experimental and mechanical characterizations of a lead free solder alloy for electronic devices

Msolli, Sabeur and Dalverny, Olivier and Alexis, Joël and Karama, Moussa. Experimental and mechanical characterizations of a lead free solder alloy for electronic devices. (2012) Advanced Materials Research, 423. 210-217. ISSN 1022-6680

Voir la publication en ligne.

Evaluation of the Local Chloride Concentration and the Local Mechanical Stresses in Intergranular Damages Grown on a 2024 Aluminum Alloy

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Blanc, Christine and Odemer, Grégory. Evaluation of the Local Chloride Concentration and the Local Mechanical Stresses in Intergranular Damages Grown on a 2024 Aluminum Alloy. (2010) ECS Transactions , 33 (35). 39-51. ISSN 1938-5862

Voir la publication en ligne.

Influence of Post-Welding Heat Treatment on the Corrosion Behavior of a 2050-T3 Aluminum-Copper-Lithium Alloy Friction Stir Welding Joint

Proton, Vincent and Alexis, Joël and Andrieu, Eric and Blanc, Christine and Delfosse, Jérôme and Lacroix, Loïc and Odemer, Grégory. Influence of Post-Welding Heat Treatment on the Corrosion Behavior of a 2050-T3 Aluminum-Copper-Lithium Alloy Friction Stir Welding Joint. (2011) Journal of The Electrochemical Society (JES), 158 (5). C139-C147. ISSN 0013-4651

Voir la publication en ligne.

Corrosion Damages Induced by Cyclic Exposure of 2024 Aluminum Alloy in Chloride-Containing Environments

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Blanc, Christine and Odemer, Grégory and Salabura, Jean-Claude. Corrosion Damages Induced by Cyclic Exposure of 2024 Aluminum Alloy in Chloride-Containing Environments. (2011) Journal of The Electrochemical Society (JES), 158 (6). C284-C295. ISSN 0013-4651

Voir la publication en ligne.

Mechanical and barrier properties of MOCVD processed alumina coatings on Ti6Al4V titanium alloy

Balcaen, Yannick and Radutoiu, Nicoleta and Alexis, Joël and Béguin, Jean-Denis and Lacroix, Loïc and Samélor, Diane and Vahlas, Constantin. Mechanical and barrier properties of MOCVD processed alumina coatings on Ti6Al4V titanium alloy. (2011) Surface and Coatings Technology, 206 (7). 1684-1690. ISSN 0257-8972

Voir la publication en ligne.

Mechanical and Surface Properties of Chemical Vapour Deposited Protective Aluminium Oxide Films on TA6V Alloy

Samélor, Diane and Aufray, Maëlenn and Lacroix, Loïc and Balcaen, Yannick and Alexis, Joël and Vergnes, Hugues and Poquillon, Dominique and Béguin, Jean-Denis and Pébère, Nadine and Marcelin, Sabrina and Caussat, Brigitte and Vahlas, Constantin. Mechanical and Surface Properties of Chemical Vapour Deposited Protective Aluminium Oxide Films on TA6V Alloy. (2010) In: CIMTEC 2010 - 12th International Ceramics Congress Part E, 6-11 June 2010, Montecatini Terme, Italy .

Voir la publication en ligne.

Potabilisation de l’eau par filtration membranaire : étude expérimentale des mécanismes de transfert des bactéries à travers la structure poreuse.

Aimar, Pierre and Alexis, Joël and Causserand, Christel and Lebleu, Nathalie and Roques, Christine. Potabilisation de l’eau par filtration membranaire : étude expérimentale des mécanismes de transfert des bactéries à travers la structure poreuse. (2007) In: 11ème Congrès de la Société Française de Génie des Procédés, 9-11 Oct 2007, Saint-Etienne .

Voir la publication en ligne.

Contactez l'ENI de Tarbes

47, avenue d'Azereix - BP 1629 - 65016 Tarbes CEDEX

+33 (0)5 62 44 27 00

  • Région Occitanie
  • Erasmus +
  • Logo midisup
  • Logo CGE
  • Logo UTFTMP
  • Logo CTI
  • Logo CDEFI
  • Logo MENESR