Gilles Dessein

PROFESSEUR DES UNIVERSITES

ServiceDIRECTION DE LA FORMATION ET DE LA VIE ETUDIANTE
Téléphone0562442773

Publications

1. This is an institutional or departmental repository. 2. OATAO (Open Archive Toulouse Archive Ouverte) holds all types of materials. 3. Papers may include: (a) unpublished pre-prints (not peer-reviewed) (b) final peer-reviewed drafts (post-prints) (c) published versions 4. Principal Languages: English; French

Off-line correction method suitable for a machining robotapplication to composite materials

29 janv. 2021 15:33 - oatao: No conditions. Results ordered -Date Deposited.

Carriere, Guillaume and Benoussaad, Mourad and Wagner, Vincent and Dessein, Gilles and Boniface, Benjamin. Off-line correction method suitable for a machining robotapplication to composite materials. (2020) The International Journal of Advanced Manufacturing Technology, 110 (9-10). 2361-2375. ISSN 0268-3768

Voir la publication en ligne

Orthogonal cutting of TA6V alloys with chamfered tools: Analysis of tool–chip contact lengths

20 oct. 2020 12:10 - oatao: No conditions. Results ordered -Date Deposited.

Barelli, Floran and Wagner, Vincent and Laheurte, Raynald and Dessein, Gilles and Darnis, Philippe and Cahuc, Olivier and Mousseigne, Michel. Orthogonal cutting of TA6V alloys with chamfered tools: Analysis of tool–chip contact lengths. (2016) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (13). 2384-2395. ISSN 0954-4054

Voir la publication en ligne

High speed interaction between an abradable coating and a labyrinth seal in turbo-engine application

12 déc. 2019 15:31 - oatao: No conditions. Results ordered -Date Deposited.

Delebarre, Corentin and Wagner, Vincent and Paris, Jean-Yves and Dessein, Gilles and Denape, Jean and Gurt-Santanach, Julien. High speed interaction between an abradable coating and a labyrinth seal in turbo-engine application. (2014) In: International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (2014), 18 June 2014 - 20 June 2014 (Toulouse, France).

Voir la publication en ligne

Analytical modeling of the CNC machine axis motion in high-speed milling with local smoothing

10 déc. 2019 10:26 - oatao: No conditions. Results ordered -Date Deposited.

Essid, Mohamed and Gassara, Bassem and Baili, Maher and Hbaieb, Moncef and Dessein, Gilles and Bouzid Saï, Wassila. Analytical modeling of the CNC machine axis motion in high-speed milling with local smoothing. (2019) The International Journal of Advanced Manufacturing Technology, 105 (1-4). 457-470. ISSN 0268-3768

Voir la publication en ligne

Broach and method for broaching slots for parts such as turbine rotor disks or turbomachine compressor disks

9 déc. 2019 14:40 - oatao: No conditions. Results ordered -Date Deposited.

Turbomeca Broach and method for broaching slots for parts such as turbine rotor disks or turbomachine compressor disks. (2015) 14/764894.

Voir la publication en ligne

Experimental investigation of tool wear and its effect on TiSiN-coated ball-end mill geometry in high-speed milling

6 déc. 2019 14:45 - oatao: No conditions. Results ordered -Date Deposited.

Belguith, Rami and Baili, Maher and Lotfi, Saï and Ben Said, Mihed and Dessein, Gilles and Bouzid, Wassila. Experimental investigation of tool wear and its effect on TiSiN-coated ball-end mill geometry in high-speed milling. (2019) The International Journal of Advanced Manufacturing Technology, 104 (9-12). 4063-4075. ISSN 0268-3768

Voir la publication en ligne

Pre-hole diameter optimization in high speed drilling considering machining cost

6 déc. 2019 10:03 - oatao: No conditions. Results ordered -Date Deposited.

Ben Meftah, Monia and Baili, Maher and Gassara, Bassem and Dessein, Gilles and Bouzid Saï, Wassila. Pre-hole diameter optimization in high speed drilling considering machining cost. (2019) International Journal of Advanced Manufacturing Technology, 103 (9-12). 3323-3336. ISSN 0268-3768

Voir la publication en ligne

Thermal and microstructure study of the chip formation during turning of Ti64 β lamellar titanium Structure

20 mai 2019 07:05 - oatao: No conditions. Results ordered -Date Deposited.

Wagner, Vincent and Barelli, Floran and Dessein, Gilles and Laheurte, Raynald and Darnis, Phillipe and Cahuc, Olivier and Mousseigne, Michel. Thermal and microstructure study of the chip formation during turning of Ti64 β lamellar titanium Structure. (2018) Journal of Manufacturing Science and Engineering, 140 (3). 1-10. ISSN 1087-1357

Voir la publication en ligne

Stability of ball-end milling on warped surface: semi-analytical and experimental analysis

14 mai 2019 08:13 - oatao: No conditions. Results ordered -Date Deposited.

Shtehin, Oleksii and Wagner, Vincent and Seguy, Sébastien and Landon, Yann and Dessein, Gilles and Mousseigne, Michel. Stability of ball-end milling on warped surface: semi-analytical and experimental analysis. (2017) The International Journal of Advanced Manufacturing Technology, 89 (9-12). 2557-2569. ISSN 0268-3768

Voir la publication en ligne

Low-frequency chatter genesis during inclined surface copy-milling with ball-end mill: experimental study

6 mai 2019 07:35 - oatao: No conditions. Results ordered -Date Deposited.

Shtehin, Oleksii and Seguy, Sébastien and Wagner, Vincent and Landon, Yann and Dessein, Gilles and Mousseigne, Michel. Low-frequency chatter genesis during inclined surface copy-milling with ball-end mill: experimental study. (2018) Machining Science and Technology, 22 (4). 621-637. ISSN 1091-0344

Voir la publication en ligne

Cutter-workpiece engagement calculation in 3-axis ball end milling considering cutter runout

26 avr. 2019 11:02 - oatao: No conditions. Results ordered -Date Deposited.

Sai, Lotfi and Belguith, Rami and Baili, Maher and Dessein, Gilles and Bouzid, Wassila. Cutter-workpiece engagement calculation in 3-axis ball end milling considering cutter runout. (2019) Journal of Manufacturing Processes, 41. 74-82. ISSN 1526-6125

Voir la publication en ligne

Modelling kinematics and cutting forces in vibration assisted drilling

10 avr. 2019 11:29 - oatao: No conditions. Results ordered -Date Deposited.

Le Dref, John and Landon, Yann and Dessein, Gilles and Espinosa, Christine. Modelling kinematics and cutting forces in vibration assisted drilling. (2016) Mechanics & Industry, 17 (3). 1-10. ISSN 2257-7777

Voir la publication en ligne

The wear mechanisms occurring in a labyrinth seal/abradable contact depending on the incursion depth parameter

9 avr. 2019 10:29 - oatao: No conditions. Results ordered -Date Deposited.

Delebarre, Corentin and Wagner, Vincent and Paris, Jean-Yves and Dessein, Gilles and Denape, Jean and Gurt-Santanach, Julien. The wear mechanisms occurring in a labyrinth seal/abradable contact depending on the incursion depth parameter. (2016) Mechanics & Industry, 17 (6). 601-620. ISSN 2257-7777

Voir la publication en ligne

Compensation of machining errors of Bspline and Cspline

28 févr. 2019 14:33 - oatao: No conditions. Results ordered -Date Deposited.

Msaddek, El Bechir and Baili, Maher and Bouaziz, Zoubeir and Dessein, Gilles. Compensation of machining errors of Bspline and Cspline. (2018) The International Journal of Advanced Manufacturing Technology, 97 (9-12). 4055-4064. ISSN 0268-3768

Voir la publication en ligne

An approach to modeling the chip thickness and cutter workpiece engagement region in 3 and 5 axis ball end milling

9 janv. 2019 15:28 - oatao: No conditions. Results ordered -Date Deposited.

Sai, Lotfi and Belguith, Rami and Baili, Maher and Dessein, Gilles and Bouzid, Wassila. An approach to modeling the chip thickness and cutter workpiece engagement region in 3 and 5 axis ball end milling. (2018) Journal of Manufacturing Processes, 34. 7-17. ISSN 1526-6125

Voir la publication en ligne

Tribological characterization of a labyrinth-abradable interaction in a turbo engine application

15 mars 2018 16:47 - oatao: No conditions. Results ordered -Date Deposited.

Delebarre, Corentin and Wagner, Vincent and Paris, Jean-Yves and Dessein, Gilles and Denape, Jean and Gurt-Santanach, Julien. Tribological characterization of a labyrinth-abradable interaction in a turbo engine application. (2017) Wear, 370-371. 29-38. ISSN 0043-1648

Voir la publication en ligne

Simulation of machining errors of Bspline and Cspline

7 déc. 2017 13:47 - oatao: No conditions. Results ordered -Date Deposited.

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles and Akrout, Mohsen. Simulation of machining errors of Bspline and Cspline. (2017) The International Journal of Advanced Manufacturing Technology, 89 (9-12). 3323-3330. ISSN 0268-3768

Voir la publication en ligne

Influence of material removal on dynamic behavior of thin walled structure in peripheral milling

12 déc. 2016 14:00 - oatao: No conditions. Results ordered -Date Deposited.

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Gilles, Cazenave-Larroche. Influence of material removal on dynamic behavior of thin walled structure in peripheral milling. (2004) In: 7th CIRP International Workshop on Modeling of Machining Operations, ENSAM Cluny, 4 May 2004 - 5 May 2004 (Cluny, France).

Voir la publication en ligne

Etude expérimentale des mécanismes d’usure intervenant lors d’un contact entre un joint d’étanchéité de type labyrinthe et un matériau abradable en application dans les turbomachines

22 avr. 2016 13:15 - oatao: No conditions. Results ordered -Date Deposited.

Delebarre, Corentin and Wagner, Vincent and Paris, Jean-Yves and Dessein, Gilles and Denape, Jean and Gurt Santanach, Julien. Etude expérimentale des mécanismes d’usure intervenant lors d’un contact entre un joint d’étanchéité de type labyrinthe et un matériau abradable en application dans les turbomachines. (2015) In: Journées Internationales Francophones de Tribologie, 27 May 2015 - 29 May 2015 (Nantes, France).

Voir la publication en ligne

Experimental Study on the Mechanical Effects of the Vibration-Assisted Ball-Burnishing Process

25 janv. 2016 14:03 - oatao: No conditions. Results ordered -Date Deposited.

Travieso-Rodríguez, Jose Antonio and Gomez-gras, Giovanni and Jorba-Peiro, Jordi and Carrillo, Francisco Javier and Dessein, Gilles and Alexis, Joël and González-Rojas, Hernan Alberto. Experimental Study on the Mechanical Effects of the Vibration-Assisted Ball-Burnishing Process. (2015) Materials and Manufacturing Processes, 30 (12). 1490-1497. ISSN 1042-6914

Voir la publication en ligne

Effects of a ball-burnishing process assisted by vibrations in G10380 steel specimens

25 janv. 2016 11:48 - oatao: No conditions. Results ordered -Date Deposited.

Travieso-Rodríguez, Jose Antonio and Gomez-gras, Giovanni and Dessein, Gilles and Carrillo, Francisco Javier and Alexis, Joël and Jorba-Peiro, Jordi and Aubazac, Nathalie. Effects of a ball-burnishing process assisted by vibrations in G10380 steel specimens. (2015) International Journal of Advanced Manufacturing Technology, 81 (9). 1757-1765. ISSN 0268-3768

Voir la publication en ligne

Ball-burnishing vibration-assisted process

5 mai 2015 10:02 - oatao: No conditions. Results ordered -Date Deposited.

Gomez-gras, Giovanni and Travieso-Rodríguez, Jose Antonio and González-Rojas, Hernan Alberto and Napoles-Alberro, Amelia and Carrillo, Francisco Javier and Dessein, Gilles. Ball-burnishing vibration-assisted process. (2014) In: Trends in the Development of Machinery and Associated Technology, 10 September 2014 - 12 September 2014 (Budapest, Hungary).

Voir la publication en ligne

Intégration des comportements dynamiques dans l'usinage de pièces aéronautiques

12 févr. 2015 14:19 - oatao: No conditions. Results ordered -Date Deposited.

Seguy, Sébastien and Arnaud, Lionel and Dessein, Gilles and Baili, Maher and Campa, Francisco Javier and Aramendi, Gorka. Intégration des comportements dynamiques dans l'usinage de pièces aéronautiques. (2006) In: 4ème Assises Machines et Usinage Grande Vitesse, 8 June 2006 - 9 June 2006 (Aix en Provence, France). (Unpublished)

Voir la publication en ligne

Control of chatter by spindle speed variation in high-speed milling

9 févr. 2015 14:31 - oatao: No conditions. Results ordered -Date Deposited.

Seguy, Sébastien and Dessein, Gilles and Arnaud, Lionel and Insperger, Tamás. Control of chatter by spindle speed variation in high-speed milling. (2010) Advanced Materials Research, 112. 179-186. ISSN 1022-6680

Voir la publication en ligne

The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting

24 sept. 2014 12:33 - oatao: No conditions. Results ordered -Date Deposited.

Wagner, Vincent and Baili, Maher and Dessein, Gilles. The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting. (2015) International Journal of Advanced Manufacturing Technology, 76 (5-8). 893-912. ISSN 0268-3768

Voir la publication en ligne

Influence of interpolation type in high-speed machining (HSM)

21 août 2014 14:36 - oatao: No conditions. Results ordered -Date Deposited.

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles. Influence of interpolation type in high-speed machining (HSM). (2014) The International Journal of Advanced Manufacturing Technology, 72 (1-4). 289-302. ISSN 0268-3768

Voir la publication en ligne

Study of a ball-burnishing vibration-assisted process

8 juil. 2014 13:42 - oatao: No conditions. Results ordered -Date Deposited.

Gomez-gras, Giovanni and Travieso-Rodríguez, Jose Antonio and González-Rojas, Hernan Alberto and Napoles-Alberro, Amelia and Carrillo, Francisco Javier and Dessein, Gilles. Study of a ball-burnishing vibration-assisted process. (2015) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (1). ISSN 0954-4054

Voir la publication en ligne

An experimental study of the high speed interaction between a labyrinth seal and an abradable coating in a turbo-engine application

7 juil. 2014 10:22 - oatao: No conditions. Results ordered -Date Deposited.

Delebarre, Corentin and Wagner, Vincent and Paris, Jean-Yves and Dessein, Gilles and Denape, Jean and Gurt Santanach, Julien. An experimental study of the high speed interaction between a labyrinth seal and an abradable coating in a turbo-engine application. (2014) Wear, 316 (1-2). 109-118. ISSN 0043-1648

Voir la publication en ligne

Development of an in-house cutting forces simulation for fir tree broaching process

25 mars 2014 12:22 - oatao: No conditions. Results ordered -Date Deposited.

Mandrile, Sébastien and Cazenave-Larroche, Gilles and Vernault, Cyril and Dessein, Gilles and Denape, Jean and Paris, Jean-Yves. Development of an in-house cutting forces simulation for fir tree broaching process. (2014) International Journal of Machining and Machinability of Materials, 15 (1/2). 18-35. ISSN 1748-5711

Voir la publication en ligne

Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy

30 janv. 2014 12:31 - oatao: No conditions. Results ordered -Date Deposited.

Dutilh, Vincent and Popa, Andreï and Dessein, Gilles and Alexis, Joël and Perrin, Géraldine. Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy. (2010) In: CIRP ICME ’10 - 7th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING, 23 June 2010 - 25 June 2010 (Capri, Italy). (Unpublished)

Voir la publication en ligne

Dynamical modeling of spindle with active magnetic bearing for milling process

23 janv. 2014 11:04 - oatao: No conditions. Results ordered -Date Deposited.

Gourc, Etienne and Seguy, Sébastien and Dessein, Gilles. Dynamical modeling of spindle with active magnetic bearing for milling process. (2011) Advanced Materials Research, 423. 200-209. ISSN 1662-8985

Voir la publication en ligne

Comparative study of tools in drilling composites T700-M21 and T800-M21

22 janv. 2014 14:36 - oatao: No conditions. Results ordered -Date Deposited.

Le Dref, John and Eyma, Florent and Dessein, Gilles and Denaud, Louis Etienne and Landon, Yann. Comparative study of tools in drilling composites T700-M21 and T800-M21. (2013) Advanced Materials Research, 698. 59-68. ISSN 1662-8985

Voir la publication en ligne

Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory

20 janv. 2014 16:01 - oatao: No conditions. Results ordered -Date Deposited.

Mousseigne, Michel and Landon, Yann and Seguy, Sébastien and Dessein, Gilles and Redonnet, Jean-Max. Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory. (2013) International Journal of Machine Tools and Manufacture, 65. 47-57. ISSN 0890-6955

Voir la publication en ligne

Ball-burnishing process influence on hardness ans residual stresses of aluminium A92017

14 janv. 2014 16:46 - oatao: No conditions. Results ordered -Date Deposited.

Travieso-Rodríguez, Jose Antonio and González-Rojas, Hernan Alberto and Gomez-gras, Giovanni and Dessein, Gilles and Alexis, Joël. Ball-burnishing process influence on hardness ans residual stresses of aluminium A92017. (2013) In: 17th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology, 10 September 2013 - 11 September 2013 (Istanbul, Turkey).

Voir la publication en ligne

Faisabilité de la mesure de champs par stéréo corrélation d’images en conditions restrictives. Application aux vibrations de pièces minces en Usinage Grande Vitesse Anglais : Analyzing feasibility of field measurement by digital image stereo correlation to flexible workpiece vibrations during high speed machining

21 oct. 2013 12:57 - oatao: No conditions. Results ordered -Date Deposited.

Wehbe, Toufic and Arnaud, Lionel and Dessein, Gilles. Faisabilité de la mesure de champs par stéréo corrélation d’images en conditions restrictives. Application aux vibrations de pièces minces en Usinage Grande Vitesse Anglais : Analyzing feasibility of field measurement by digital image stereo correlation to flexible workpiece vibrations during high speed machining. (2013) In: 19th LAAS Internation Science Conference, 5 April 2013 - 6 April 2013 (Beirut, Lebanon).

Voir la publication en ligne

Analytical and experimental study of feed rate in high-speed milling

17 mai 2013 09:49 - oatao: No conditions. Results ordered -Date Deposited.

Gassara, Bassem and Dessein, Gilles and Baili, Maher and Hbaieb, Moncef and Saï, Wassila Bouzid. Analytical and experimental study of feed rate in high-speed milling. (2013) Machining Science and Technology, 17 (2). 181-208. ISSN 1091-0344

Voir la publication en ligne

Stéréo-corrélation d'image : application aux vibrations d'une paroi mince en usinage

15 mai 2013 12:20 - oatao: No conditions. Results ordered -Date Deposited.

Fazzini, Marina and Wehbe, Toufic and Dessein, Gilles and Arnaud, Lionel and Seguy, Sébastien. Stéréo-corrélation d'image : application aux vibrations d'une paroi mince en usinage. (2007) In: Colloque méthodes et techniques optiques pour l'industrie, CMOI, 19-23 Nov 2007, Arcachon, France .

Voir la publication en ligne

Modélisation du comportement cinématique des axes d'un centre d'usinage en fraisage à grande vitesse

23 avr. 2013 15:19 - oatao: No conditions. Results ordered -Date Deposited.

Gassara, Bassem and Dessein, Gilles and Baili, Maher and Hbaieb, Moncef and Bouzid Saï, Wassila. Modélisation du comportement cinématique des axes d'un centre d'usinage en fraisage à grande vitesse. (2012) In: 4th International Symposium on Aircraft Materials, 09-12 May 2012, Fez, Morocco .

Voir la publication en ligne

Influence de la température sur l’usinabilité du Ti-5-5-5-3

22 avr. 2013 14:13 - oatao: No conditions. Results ordered -Date Deposited.

Baili, Maher and Wagner, Vincent and Dessein, Gilles and Sallabery, Julien and Lallement, Daniel. Influence de la température sur l’usinabilité du Ti-5-5-5-3. (2010) In: International Symposium on Aircraft Materials, 12 May 2010 - 14 May 2010 (Marrakech, Morocco).

Voir la publication en ligne

Identification of tool failure modes in drilling Udimet® 720 superalloy

22 avr. 2013 13:16 - oatao: No conditions. Results ordered -Date Deposited.

Popa, Andreï and Baili, Maher and Dessein, Gilles and Dutilh, Vincent. Identification of tool failure modes in drilling Udimet® 720 superalloy. (2011) In: International conference on structural analysis of advanced materials (ICSAAM2011), 7 September 2011 - 10 September 2011 (Sinaia, Romania).

Voir la publication en ligne

Identification of influent factors on surface integrity in nickel-base superalloy drilling

16 avr. 2013 08:21 - oatao: No conditions. Results ordered -Date Deposited.

Popa, Andreï and Dutilh, Vincent and Baili, Maher and Dessein, Gilles and Perrin, Géraldine. Identification of influent factors on surface integrity in nickel-base superalloy drilling. (2010) In: 19th International Conference on Manufacturing Systems - ICMaS 2010, 11 November 2010 - 12 November 2010 (Bucharest, Romania).

Voir la publication en ligne

Analyse et réduction des vibrations d'usinage d'une pièce automobile produite en grande série

10 avr. 2013 14:03 - oatao: No conditions. Results ordered -Date Deposited.

Arnaud, Lionel and Dutilh, Vincent and Dessein, Gilles and Saussol, Antoine and Arnaud, Michel. Analyse et réduction des vibrations d'usinage d'une pièce automobile produite en grande série. (2008) In: XVIème Colloque Vibrations, Chocs & Bruit, 10-12 juin, 2008, Lyon, France .

Voir la publication en ligne

Influence d'une vitesse de rotation variable sur les vibrations d'usinage en UGV

8 avr. 2013 12:32 - oatao: No conditions. Results ordered -Date Deposited.

Seguy, Sébastien and Arnaud, Lionel and Dessein, Gilles and Insperger, Tamás and Peigné, Grégoire. Influence d'une vitesse de rotation variable sur les vibrations d'usinage en UGV. (2008) In: 5ème Assises Machines et Usinage à Grande Vitesse - Assises MUGV 2008, 5-6 June 2008, Nantes, France .

Voir la publication en ligne

Kinematic behaviour modeling of the axes of a machining center in high speed milling

3 avr. 2013 14:07 - oatao: No conditions. Results ordered -Date Deposited.

Gassara, Bassem and Dessein, Gilles and Baili, Maher and Hbaieb, Moncef and Bouzid Saï, Wassila. Kinematic behaviour modeling of the axes of a machining center in high speed milling. (2013) Advanced Materials Research, 698. 39-48. ISSN 1022-6680

Voir la publication en ligne

Feed rate modeling in circular–circular interpolation discontinuity for high-speed milling

3 avr. 2013 13:32 - oatao: No conditions. Results ordered -Date Deposited.

Gassara, Bassem and Baili, Maher and Dessein, Gilles and Hbaieb, Moncef and Bouzid Saï, Wassila. Feed rate modeling in circular–circular interpolation discontinuity for high-speed milling. (2013) The International Journal of Advanced Manufacturing Technology, 65 (9 -12). 1619-1634. ISSN 0268-3768

Voir la publication en ligne

Vibrations d'usinage en tournage intérieur fortement interrompu, d'une pièce produite en grande série

29 mars 2013 15:25 - oatao: No conditions. Results ordered -Date Deposited.

Arnaud, Lionel and Dutilh, Vincent and Dessein, Gilles and Insperger, Tamás. Vibrations d'usinage en tournage intérieur fortement interrompu, d'une pièce produite en grande série. (2008) In: 5ème Assises Machines et Usinage à Grande Vitesse - Assises MUGV 2008, 5-6 June 2008, Nantes, France .

Voir la publication en ligne

Etude expérimentale du comportement vibratoire d'une pièce mince en usinage

29 mars 2013 15:05 - oatao: No conditions. Results ordered -Date Deposited.

Wehbe, Toufic and Dessein, Gilles and Arnaud, Lionel. Etude expérimentale du comportement vibratoire d'une pièce mince en usinage. (2008) In: 5ème Assises Machines et Usinage à Grande Vitesse - Assises MUGV 2008, 5-6 June 2008, Nantes, France .

Voir la publication en ligne

Application de la théorie des lobes de stabilité au fraisage de parois minces

29 mars 2013 14:59 - oatao: No conditions. Results ordered -Date Deposited.

Arnaud, Lionel and Dessein, Gilles. Application de la théorie des lobes de stabilité au fraisage de parois minces. (2002) In: 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering - IDMME 2002, 14-16 May 2002, Clermont-Ferrand, France . (Unpublished)

Voir la publication en ligne

Influence of material removal on the dynamic behavior of thin-walled structures in peripheral milling

15 mars 2013 08:30 - oatao: No conditions. Results ordered -Date Deposited.

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Cazenave-Larroche, Gilles. Influence of material removal on the dynamic behavior of thin-walled structures in peripheral milling. (2006) Machining Science and Technology, 10 (3). 275-287. ISSN 1091-0344

Voir la publication en ligne

Influence de la position de l'outil sur le comportement dynamique en fraisage de parois minces

13 mars 2013 14:10 - oatao: No conditions. Results ordered -Date Deposited.

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Cazenave-Larroche, Gilles. Influence de la position de l'outil sur le comportement dynamique en fraisage de parois minces. (2005) Mécanique & Industries, 6 (4). 403-410. ISSN 1296-2139

Voir la publication en ligne

Experimental study of coated carbide tools behaviour: application for Ti-5-5-5-3 turning

5 mars 2013 15:57 - oatao: No conditions. Results ordered -Date Deposited.

Wagner, Vincent and Baili, Maher and Dessein, Gilles and Lallement, Daniel. Experimental study of coated carbide tools behaviour: application for Ti-5-5-5-3 turning. (2011) International Journal of Machining and Machinability of Materials, 9 (3/4). 233-248. ISSN 1748-5711

Voir la publication en ligne

Experimental study of thin part vibration modes in machining

5 mars 2013 15:24 - oatao: No conditions. Results ordered -Date Deposited.

Wehbe, Toufic and Dessein, Gilles and Arnaud, Lionel. Experimental study of thin part vibration modes in machining. (2008) In: 17th International Conference on Manufacturing Systems – ICMaS, 13-14 Nov 2008, Bucharest, Romania .

Voir la publication en ligne

Optimización del fresado de piezas de rigidez reducida mediante un modelo de estabilidad tridimensional

5 mars 2013 14:01 - oatao: No conditions. Results ordered -Date Deposited.

Campa, Francisco Javier and López de Lacalle, Luis Norberto and Herranz, Sergio and Arnaud, Lionel and Ukar, E. and Dessein, Gilles. Optimización del fresado de piezas de rigidez reducida mediante un modelo de estabilidad tridimensional. (2005) In: 7º Congreso iberoamericano de ingenieria mecanica - 2005, 12-14 Oct 2005, Mexico .

Voir la publication en ligne

Fresado de estructuras de rigidez reducida utilizando un modelo de estabilidad en el dominio de la frecuencia

5 mars 2013 11:38 - oatao: No conditions. Results ordered -Date Deposited.

Campa, Francisco Javier and López de Lacalle, Luis Norberto and Aramendi, Gorka and Seguy, Sébastien and Arnaud, Lionel and Dessein, Gilles and Herranz, Sergio. Fresado de estructuras de rigidez reducida utilizando un modelo de estabilidad en el dominio de la frecuencia. (2006) In: XVI Congreso de Maquinas Herramienta y Tecnologias de Fabricacion, 18-20 Octobre 2006, San Sebastian, 18 October 2006 - 20 October 2006 (San Sebastian, Spain). (Unpublished)

Voir la publication en ligne

Chatter Control by Spindle Speed Variation in High-Speed Milling

1 mars 2013 15:14 - oatao: No conditions. Results ordered -Date Deposited.

Seguy, Sébastien and Dessein, Gilles and Arnaud, Lionel and Insperger, Tamás. Chatter Control by Spindle Speed Variation in High-Speed Milling. (2010) In: ICSAAM 2009, 7-10 Sept 2009, Tarbes, France .

Voir la publication en ligne

Modeling and simulation of high speed milling centers dynamics

27 févr. 2013 13:35 - oatao: No conditions. Results ordered -Date Deposited.

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles. Modeling and simulation of high speed milling centers dynamics. (2010) In: 5th International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM2010), 18-20 Dec 2010, Hammamet, Tunisia .

Voir la publication en ligne

Behaviour laws comparison for titanium alloys machining: Application to Ti5553

27 févr. 2013 13:09 - oatao: No conditions. Results ordered -Date Deposited.

Wagner, Vincent and Baili, Maher and Dessein, Gilles and Lallement, Daniel. Behaviour laws comparison for titanium alloys machining: Application to Ti5553. (2009) In: International conference on structural analysis of advanced materials, 7 September 2009 - 10 September 2009 (Tarbes, France).

Voir la publication en ligne

Experimental characterization of behavior laws for titanium alloys: application to Ti5553

27 févr. 2013 09:45 - oatao: No conditions. Results ordered -Date Deposited.

Wagner, Vincent and Baili, Maher and Dessein, Gilles and Lallement, Daniel. Experimental characterization of behavior laws for titanium alloys: application to Ti5553. (2010) Key Engineering Materials, 446. 147-155. ISSN 1662-9795

Voir la publication en ligne

Simulation Tool of the HSM machine dynamic behavior

26 févr. 2013 12:44 - oatao: No conditions. Results ordered -Date Deposited.

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles. Simulation Tool of the HSM machine dynamic behavior. (2011) In: Milling: Operations, Applications and Industrial Effects. Nova Science Publishers, 209-228. ISBN 978-1-61470-903-9

Voir la publication en ligne

Simulation of the deflected cutting tool trajectory in complex surface milling

22 févr. 2013 14:10 - oatao: No conditions. Results ordered -Date Deposited.

Smaoui, Moez and Bouaziz, Zoubeir and Zghal, Ali and Dessein, Gilles and Baili, Maher. Simulation of the deflected cutting tool trajectory in complex surface milling. (2011) The International Journal of Advanced Manufacturing Technology, 56 (5-8). 463-474. ISSN 0268-3768

Voir la publication en ligne

Links Between Machining Parameters and Surface Integrity in Drilling Ni-Superalloy

18 févr. 2013 13:52 - oatao: No conditions. Results ordered -Date Deposited.

Dutilh, Vincent and Dessein, Gilles and Alexis, Joël and Perrin, Géraldine. Links Between Machining Parameters and Surface Integrity in Drilling Ni-Superalloy. (2010) Advanced Materials Research, 112. 171-178. ISSN 1662-8985

Voir la publication en ligne

Toolpath dependent stability lobes for the milling of thin-walled parts

25 janv. 2013 14:53 - oatao: No conditions. Results ordered -Date Deposited.

Seguy, Sébastien and Campa, Francisco Javier and López de Lacalle, Luis Norberto and Arnaud, Lionel and Dessein, Gilles and Aramendi, Gorka. Toolpath dependent stability lobes for the milling of thin-walled parts. (2008) International journal of machining and machinability of materials, 4 (4). 377-392. ISSN 1748-5711

Voir la publication en ligne

Suppression of period doubling chetter in high-speed milling by spindle speed variation

25 janv. 2013 14:14 - oatao: No conditions. Results ordered -Date Deposited.

Seguy, Sébastien and Insperger, Tamás and Arnaud, Lionel and Dessein, Gilles and Peigné, Grégoire. Suppression of period doubling chetter in high-speed milling by spindle speed variation. (2011) Machining Science and Technology, 15 (2). 153-171. ISSN 1091-0344

Voir la publication en ligne

Integration of dynamic behaviour variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling

25 janv. 2013 10:51 - oatao: No conditions. Results ordered -Date Deposited.

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Cazenave-Larroche, Gilles. Integration of dynamic behaviour variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling. (2006) The International Journal of Advanced Manufacturing Technology, 27 (7-8). 638-644. ISSN 0268-3768

Voir la publication en ligne

Improving the surface finish of concave and convex surfaces using a ball burnishing process

16 janv. 2013 08:47 - oatao: No conditions. Results ordered -Date Deposited.

Travieso-Rodríguez, Jose Antonio and Dessein, Gilles and González-Rojas, Hernan Alberto. Improving the surface finish of concave and convex surfaces using a ball burnishing process. (2011) Materials and Manufacturing Processes, 26 (12). 1494-1502. ISSN 1042-6914

Voir la publication en ligne

Compensation of a ball end tool trajectory in complex surface milling

20 déc. 2012 09:59 - oatao: No conditions. Results ordered -Date Deposited.

Smaoui, Moez and Bouaziz, Zoubeir and Zghal, Ali and Baili, Maher and Dessein, Gilles. Compensation of a ball end tool trajectory in complex surface milling. (2012) International Journal of Machining and Machinability of Materials, 11 (1). 51-68. ISSN 1748-5711

Voir la publication en ligne

An Experimental Investigation of Hot Machining with Induction to Improve Ti-5553 Machinability

11 déc. 2012 10:53 - oatao: No conditions. Results ordered -Date Deposited.

Baili, Maher and Wagner, Vincent and Dessein, Gilles and Sallabery, Julien and Lallement, Daniel. An Experimental Investigation of Hot Machining with Induction to Improve Ti-5553 Machinability. (2011) Applied Mechanics and Materials, 62. 67-76. ISSN 1660-9336

Voir la publication en ligne

Application of the stability lobes theory to milling of thin workpieces, experimental approach

5 déc. 2012 14:00 - oatao: No conditions. Results ordered -Date Deposited.

Arnaud, Lionel and Dessein, Gilles. Application of the stability lobes theory to milling of thin workpieces, experimental approach. (2003) In: Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering. Kluwer academic publishers, 271-280. ISBN 978140201163

Voir la publication en ligne

Investigation of tool failure modes and machining disturbances using monitoring signals

3 déc. 2012 16:32 - oatao: No conditions. Results ordered -Date Deposited.

Popa, Andreï and Dessein, Gilles and Baili, Maher and Dutilh, Vincent. Investigation of tool failure modes and machining disturbances using monitoring signals. (2012) Advanced Materials Research, 423. 128-142. ISSN 1022-6680

Voir la publication en ligne

Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones

19 nov. 2012 17:05 - oatao: No conditions. Results ordered -Date Deposited.

Senatore, Johanna and Segonds, Stéphane and Rubio, Walter and Dessein, Gilles. Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones. (2012) Computer-Aided Design, 44 (12). 1151-1160. ISSN 00104485

Voir la publication en ligne

On the stability of high-speed milling with spindle speed variation

12 nov. 2012 09:57 - oatao: No conditions. Results ordered -Date Deposited.

Seguy, Sébastien and Insperger, Tamás and Arnaud, Lionel and Dessein, Gilles and Peigné, Grégoire. On the stability of high-speed milling with spindle speed variation. (2010) The International Journal of Advanced Manufacturing Technology, 48 (9-12). 883-895. ISSN 0268-3768

Voir la publication en ligne

Surface roughness variation of thin wall milling, related to modal interactions

5 nov. 2012 14:17 - oatao: No conditions. Results ordered -Date Deposited.

Seguy, Sébastien and Dessein, Gilles and Arnaud, Lionel. Surface roughness variation of thin wall milling, related to modal interactions. (2008) International Journal of Machine Tools and Manufacture, 48 (3-4). 261-274. ISSN 0890-6955

Voir la publication en ligne

Optimization of pocket machining strategy in HSM

26 sept. 2012 14:48 - oatao: No conditions. Results ordered -Date Deposited.

Msaddek, El Bechir and Bouaziz, Zoubeir and Dessein, Gilles and Baili, Maher. Optimization of pocket machining strategy in HSM. (2012) The International Journal of Advanced Manufacturing Technology, 62 (1-4). 69-81. ISSN 0268-3768

Voir la publication en ligne

Contribution to Multiagent Machine tool Control: Intelligent Sensors for Feeddrive Monitoring

6 juil. 2010 14:11 - oatao: No conditions. Results ordered -Date Deposited.

Desforges, Xavier and Habbadi, Abdallah and Dessein, Gilles. Contribution to Multiagent Machine tool Control: Intelligent Sensors for Feeddrive Monitoring. (2001) In: Mechatronics 2000, 1st IFAC Conference on Mechatronic Systems, 18-20 Sept 2000, Darmstadt, Germany .

Voir la publication en ligne

Contactez l'ENI de Tarbes

47, avenue d'Azereix - BP 1629 - 65016 Tarbes CEDEX

+33 (0)5 62 44 27 00

  • Région Occitanie
  • Erasmus +
  • Logo midisup
  • Logo CGE
  • Logo UTFTMP
  • Logo CTI
  • Logo CDEFI
  • Logo MENESR
  • Bienvenue en France
  • certification_FCU_N_FdC
  • EUR-ACE